| Malfunction | Cause | Fixing method |
|---|---|---|
| Wrapper motor doesn’t work | Improperly order controlling, Electrical motor 1 is turned off, Fuse or power-board burnt out, Starting capacitor damaged, Non-contact sensor of film feeding is damaged | Change non-contact sensor, Change starting capacitor, Change fuse and check power-board |
| Temperature of heat-sealers isn‘t increase | Electro-thermal tube is damaged, Circuit malfunction, Fuse break, Temperature control device is damaged | Change the Electro-thermal tube, Check circuit, Change the fuse, Change the control device of temperature |
| Heat-sealing not tight enough | Uneven internal coating of wrapper, Pressure of heat-sealing being uneven, Aging, wearing-out or tearing of the heat-sealing pad, The temperature of heat-sealing is not high enough. | Remove the unqualified wrapper, Adjust heat-sealing pressure, Change the heat-sealing pad, Increase the temperature of heat-sealing. |
| Temperature of heat-sealer is lost control | Thermoelectric pair opens circuit, Temperature control device is damaged | Change pair, Change the control device |
| Color mark positions no effect | Bag length preset value unfit, usually, bag length is shorter than standard length of color mark, The roller pattern has worn-out, rubbing force decrease. | Increase bag length preset value, Let fact length is equal or long than standard length of color mark. |
| Film feeding motor doesn’t turn | Film feeding control arm is blocked. Non-contact sensor of film feeding is damaged. Starting capacitor damaged. Fuse or power—board brunt out. | Solve blocking reason. Change non-contact sensor. Change starting capacitor. Change fuse and check power—board. |
| No material is filled into the bags | The rocker of faucet is loose. The change of filling material level is large. The pipe is stuffed. The faucet is in wrong position | Fasten the screw of the faucet rocker. Control the material level. Dredge the pipe. Adjust the position of the faucet. |
| The filling motor doesn’t work | The filling non-contact sensor is in wrong position, the controlling Board is broken. Driving motor and filling motor are broken | Adjust the position of the non–contact sensor and let it send out signals. Change the controlling board, change the driving motor or filling motor. |
| No film-pulling | Circuit malfunction, Film-pulling non-contact sensor is damaged. Film length controller malfunction. The driver of step motor malfunction. | Check circuit and fix the malfunction. Change non—contact sensor. Change film length controller, Change the driver of step motor |
| The film—pulling controller is not steady | Circuit malfunction. Bag—pulling non—contact sensor is damaged or the bag—pulling signal cam is far away. Bag length controller malfunction. The driver of step motor malfunction. | Check circuit and fix the malfunction. Change non—contact sensor, or adjust the bag—pulling signal cam. Change bag length controller. Change the driver of step motor. |
บริษัท อินเตอร์ แมชชีนเนอรี่ (ประเทศไทย) จำกัด
ที่อยู่: 9 สะแกงามซอย 30 แขวงแสมดำ เขตบางขุนเทียน
กรุงเทพมหานคร 10150
กรุณาเข้าสู่ระบบสมาชิก เพื่อเขียนรีวิวสินค้า
เข้าสู่ระบบ / สมัครสมาชิกยังไม่มีรีวิว เป็นคนแรกที่รีวิวสินค้านี้เลย!
