Notes
1. The machine is powered by 220V AC voltage, and the power socket must be
grounded according to the third method of national standard. Don’t pull over the
power cord to prevent it torn.
2. Please pay attention to check and clean the machine before working, and always
add lubricating oil to the sliding parts to ensure the service life of the sliding parts or
it may cause unnecessary accidental damage.
3. The screen is mainly used to display the fault points in the
machine work. When an alarm occurs in the machine, the technician can quickly
troubleshoot according to the content prompted in the (alarm information).
4. When the machine has a fault alarm during the operation, please press the
emergency stop switch first to stop the machine. After the fault is resolved, reset the
emergency stop button, and then touch the fault reset button in the screen, the
machine will automatically reset. (The fault reset button is invalid when emergency
stop does not reset).
5. After the machine is reset, make sure that all parts of the machine are normal before
proceeding to the next step (otherwise the machine will make mistakes).
6. There is a 220V voltage inside the electric control box, and non-professionals
cannot open it to avoid accidental electric shock.
7. Do not place it in an environment which has great changes in humidity, or it may
cause condensation inside the device, resulting in damage to the device.
8. When adjusting the speed of each cylinder, it should not be too fast in order to
avoid that the impact is too large to damage the products and equipment parts (it is
better to adjust the speed as fast as possible without the impact sound, but it should be
carried out according to the actual situation).
9. Turn off the power supply and air source when the machine is under maintain or
repairing special faults to prevent accidental injury to the person, such as electric
shock and pinching.
10. Before going to get off work and after work every day, please clean up the
machine to ensure that the machine is clean and free of debris.
11. Regularly (every 10 days) check the lubrication of each sliding part of the
machine. If you find that the lubricating oil is not enough, please add lubricating oil in
time to ensure the normal operation and service life of the machine.
12. Regularly (every week) check whether the screws in the frequently moving parts
are loose. If they are loose, please tighten them in time